COMMERCIAL GAS MANAGEMENT SERVICES
READY TO TAKE YOUR CALL: 01455 848 491
These are normally supplied via single cylinder manifolds or multi stage regulators.
Typical high purity gases
Helium
Nitrogen
Carbon Dioxide
The latest Fiber laser machines only require high pressure gases for the cutting process.
Gascare Services offer a complete solution to your laser gas installation, from the manifold to the outlet position.
Our “competent” engineers will install your piped gas installation to the requirements of the BCGA (British Compressed Gas Association) Codes of Practice.
Upon completion of installation , and successful strength and leak testing a certificate is issued.
Gascare Services offer a complete solution to your laser gas installation, from the manifold to the outlet position.
Our “competent” engineers will install your piped gas installation to the requirements of the BCGA (British Compressed Gas Association) Codes of Practice.
The majority of laser cutting machines require either Nitrogen or Oxygen gas (even both) delivered at high-pressure.
The gas is supplied via cylinders (MCP) or bulk tank, and will need a gas system capable of withstanding up to 31 bar.
The laser gases are supplied via single cylinders, and it is critical that the gas supply is Grade 5 (99.999%) high purity to prevent impuities affecting the laser process.